TP-Link TD-W9977 User Manual
  1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Network Router
  5. TD-W9977
  6. User manual

TP-Link TD-W9977 User Manual

N300 wireless gigabit vdsl/adsl modem router
Hide thumbs
Table of Contents

Advertisement

Quick Links

User Guide

N300 Wireless Gigabit VDSL/ADSL Modem Router
TD-W9977
REV1.0.0
1910011880

Advertisement

Table of Contents
loading

Related Manuals for TP-Link TD-W9977

Summary of Contents for TP-Link TD-W9977

  • Page 1: User Guide

    User Guide N300 Wireless Gigabit VDSL/ADSL Modem Router TD-W9977 REV1.0.0 1910011880...

  • Page 2: Table Of Contents

    Contents About This Guide Chapter 1 Get to Know Your Modem Router 1. 1. Product Overview............3 1.
  • Page 3 10. 1. Share Local Resources in the Internet by Virtual Server..... . 36 10. 2. Open Ports Dynamically by Port Triggering ........37 10.

  • Page 4: About This Guide

    • The Quick Installation Guide (QIG) can be found where you find this guide or inside the package of the router. • Specifications can be found on the product page at http://www.tp-link.com. • A Technical Support Forum is provided for you to discuss our products at http://forum.tp-link.com.

  • Page 5: Chapter 1 Get To Know Your Modem Router

    Chapter Get to Know Your Modem Router This chapter introduces the modem router and shows its appearance. It contains the following sections: • Product Overview • Product Appearance...

  • Page 6: Product Overview

    Chapter 1 Get to Know Your Modem Router Product Overview TP-Link’s Modem Router is a combined wired/wireless network connection device with integrated wireless router and DSL modem, reducing hassle of configuration and saving space. With DSL and EWAN ports, the modem router is compatible with DSL connections and fiber/cable access.
  • Page 7 Chapter 1 Get to Know Your Modem Router Indication Status System initialization complete. System initializing or firmware upgrading is in process. Flashing Do not disconnect or power off the modem router. Power Power is off. Please ensure that the power adapter is connected correctly.

  • Page 8: Back Panel

    Chapter 1 Get to Know Your Modem Router Back Panel The back panel provides buttons, connection ports, and antennas. Refer to the following for detailed instructions. Description Item For connecting the modem router to the Internet. Connect the port to DSL Port the splitter or directly connect the port to the phone jack via a phone cable.

  • Page 9: Chapter 2 Connect The Hardware

    Chapter Connect the Hardware This chapter contains the following sections: • Position Your Modem Router • Connect Your Modem Router...

  • Page 10: Position Your Modem Router

    Chapter 2 Connect the Hardware Position Your Modem Router With the modem router, you can access your network from anywhere within the wireless network coverage. However, the wireless signal strength and coverage vary depending on the actual environment of your modem router. Many obstacles may limit the range of the wireless signal, for example, concrete structures or thick walls.
  • Page 11 Chapter 2 Connect the Hardware Connect your computer to the modem router. Method 1: Wired Connect your computer’s Ethernet port to a LAN port on the modem router via an Ethernet cable. Method 2: Wireless Connect wirelessly by using the default SSID (Wireless Network Name) and Wireless Password printed on the product label of the modem router.

  • Page 12: Chapter 3 Log In To Your Modem Router

    Chapter Log in to Your Modem Router...
  • Page 13 Chapter 3 Log in to Your Modem Router With a web management page, it is easy to configure and manage the modem router. The web management page can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari. Follow the steps below to log into your modem router.

  • Page 14: Chapter 4 Set Up Internet Connections

    Chapter Set Up Internet Connections This chapter introduces how to connect your modem router to the Internet. The modem router is equipped with a web-based Quick Setup wizard. It has many ISP information built in, automates many of the steps and verifies that those steps have been successfully completed.

  • Page 15: Use Quick Setup Wizard

    Chapter 4 Set Up Internet Connections Use Quick Setup Wizard Visit http://tplinkmodem.net, and log in with the password you set for the modem router. Select your Region Time Zone, then click Next. Follow the step-by-step instructions of the Quick Setup to complete the initial configuration.

  • Page 16: Test Internet Connectivity

    Chapter 4 Set Up Internet Connections Test Internet Connectivity After manually setting up the Internet connection, you need to test the Internet connectivity. The modem router provides a diagnostic tool to help you locate the malfunction. Visit http://tplinkmodem.net, and log in with the password you set for the modem router.

  • Page 17: Wireless Router Mode

    Chapter 4 Set Up Internet Connections Select your WAN Interface Name (Status should be Connected) and click the (Edit) icon. Scroll down the page, enable IPv6, and configure the IPv6 parameters. Addressing Type: Consult your ISP for the addressing type, DHCPv6 or SLAAC. SLAAC is the most commonly used addressing type.

  • Page 18: Wireless Router

    Chapter 4 Set Up Internet Connections Connect your computer to the modem router. For details, refer to Connect Your Modem Router. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. Go to Advanced > Operation Mode, select the Wireless Router Mode, and click...

  • Page 19: Chapter 5 Bandwidth Control

    Chapter Bandwidth Control The Bandwidth Control feature is used to fully utilize your limited bandwidth and optimize the load respectively. With this feature enabled, you can assign a specific minimum or maximum bandwidth for each computer, thus minimizing the impact caused by heavy load.
  • Page 20 Chapter 5 Bandwidth Control I want to: Use an independent bandwidth and enjoy a good Internet experience without being affected by other users who are sharing the same router. example, my roommate and I share 512Kbps Upstream Bandwidth and 4Mbps Downstream Bandwidth via this router, she likes to watch live show and play online games, which may take up much bandwidth.
  • Page 21 Chapter 5 Bandwidth Control IP Range: Enter the IP address. The field can be single IP address or IP address range according to your demands. When you configure the single IP address, the computer with this IP address will get independent given bandwidth. When you configure the IP address range, all computers in the range will share the given bandwidth.
  • Page 22 Chapter 5 Bandwidth Control Done! Now you and your roommate have an independent bandwidth.

  • Page 23: Chapter 6 Network Security

    Chapter Network Security This chapter guides you on how to protect your home network from unauthorized users by implementing these three network security functions. You can block or allow specific client devices to access your wireless network using MAC Filtering, or using Access Control for wired and wireless networks, or you can prevent ARP spoofing and ARP attacks by using IP &...

  • Page 24: Mac Filtering

    Chapter 6 Network Security MAC Filtering This function exploits the uniqueness of the MAC (Medium Access Control) address, a unique 12-digit hexadecimal address (for example, D8:5D:4C:B4:46:EA) of every network device, to determine if the device can or cannot access your wireless network. I want to: Prevent unauthorized users from accessing my wireless network by utilizing the network device’s MAC address.

  • Page 25: Access Control

    Chapter 6 Network Security 3 Select the filtering rule to either block (recommended) or allow the device(s) in the list. To block/allow specific device(s) 1 ) Select Block wireless access from the devices in the list below Allow wireless access only from the devices in the list below and click Save.
  • Page 26 Chapter 6 Network Security 3 Select the access mode to either block (recommended) or allow the device(s) in the list. To block specific device(s) 1 ) Select Blacklist and click Save. 2 ) Select the device(s) to be blocked in the Devices Online table.

  • Page 27: Ip & Mac Binding

    Chapter 6 Network Security 3 ) Enter the Device Name MAC Address (You can copy and paste the information from Devices Online table if the device is connected to your network). 4 ) Click OK. Done! Now you can block or allow specific client devices to access your network (via wired or wireless) using the Blacklist or Whitelist.
  • Page 28 Chapter 6 Network Security 1 ) Click Add. 2 ) Enter the MAC address IP address that you want to bind. 3 ) Select the check box to enable the entry and click OK. Done! Now you don’t need to worry about ARP spoofing and ARP attacks.

  • Page 29: Chapter 7 Iptv

    Chapter IPTV IPTV is the abbreviation of Internet Protocol Television. The service can only be delivered through the Internet, and our modem router provides a specific LAN port for IPTV. By automatically separating IPTV from Internet surfing, we guarantee you a high quality of video streaming and a high speed of Internet surfing.
  • Page 30 Chapter 7 IPTV I want to: Configure the modem router to enable Internet Protocol Television (IPTV) Services. example, I already bought IPTV service, but this service can only be delivered through the Internet. Therefore, I need to configure my modem router first. How can I 1 Visit http://tplinkmodem.net, and log in with the password do that?

  • Page 31: Chapter 8 Parental Controls

    Chapter Parental Controls This function allows you to block inappropriate, explicit and malicious websites, and control access to specified websites at specified time.
  • Page 32 Internet and even types of websites they can visit. example, I want to allow my children’s devices (e.g. a computer or a tablet) to access only www.tp-link.com and Wikipedia.org from 18:00 (6PM) to 22:00 (10PM) on weekdays and not other time.
  • Page 33 Chapter 8 Parental Controls 4 Click View Existing Devices, and select the device to be controlled. Or, enter the Device Name MAC Address manually. 5 Click the icon to set the Effective Time. Drag the cursor over the appropriate cell(s) and click OK. 6 Enter a Description for the entry.
  • Page 34 Blacklist and Whitelist. Below are some sample entries to allow access. 1 ) Enter a web address (e.g. www.tp-link.com) or a web address keyword (e.g. wikipedia) to only allow or block access to the websites containing that keyword.

  • Page 35: Chapter 9 Guest Network

    Chapter Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can assign network authorities and bandwidth for guests to ensure network security, privacy, and fluency.

  • Page 36: Create A Network For Guests

    Chapter 9 Guest Network Create a Network for Guests Visit http://tplinkmodem.net, and log in with the password you set for the modem router. Go to Advanced > Guest Network. Locate the Wireless section. Create a 2.4GHz guest network. 1 ) Enable 2.4GHz guest network. 2 ) Set an easy-to-identify SSID.
  • Page 37 Chapter 9 Guest Network Assign network authorities and bandwidth according to your needs. Note: Some modem routers may not offer some of these guest network options. • Allow guests to see each other Select this check box to allow the clients in your guest network to access each other.

  • Page 38: Chapter 10 Nat Forwarding

    Internet to initiatively communicate with the devices in the local network, thus to realize some special functions. TP-Link modem router includes four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Virtual Servers, Port Triggering, UPnP and DMZ.

  • Page 39: Share Local Resources In The Internet By Virtual Server

    Chapter 10 NAT Forwarding 10 1 Share Local Resources in the Internet by Virtual Server When you build up a server in the local network and want to share it on the Internet, Virtual Server can realize the service and provide it to the Internet users. At the same time virtual server can keep the local network safe as other services are still invisible from the Internet.

  • Page 40: Open Ports Dynamically By Port Triggering

    Chapter 10 NAT Forwarding 4 Click View Existing Services, and choose HTTP. The external port, internal port and protocol will be automatically filled with contents. Enter the PC’s IP address 192.168.1.100 in Internal IP field. 5 Click to save the settings. Tips: 1.

  • Page 41: Free Applications From Port Restriction By Dmz

    Chapter 10 NAT Forwarding modem router can forward them to the corresponding host. Port triggering is mainly applied to online games, VoIPs and video players. Common applications include MSN Gaming Zone, Dialpad and Quick Time 4 players, etc. Follow the steps below to configure the port triggering rules: Visit http://tplinkmodem.net, and log in with the password you set for the modem router.

  • Page 42: Make Xbox Online Games Run Smoothly By Upnp

    Chapter 10 NAT Forwarding applications, like IP camera and database software, you can set the PC to be a DMZ host. Note: DMZ is more applicable in the situation that users are not clear about which ports to open. When it is enabled, the DMZ host is totally exposed to the Internet, which may bring some potential safety hazard.
  • Page 43 Chapter 10 NAT Forwarding to use applications for multiplayer gaming, peer-to-peer connections, real-time communication (such as VoIP or telephone conference) or remote assistance, etc. Tips: 1. UPnP is enabled by default in this modem router. 2. Only the application supporting UPnP protocol can use this feature. 3.

  • Page 44: Chapter 11 Specify Your Network Settings

    Chapter Specify Your Network Settings This chapter introduces how to change the default settings or adjust the basic configuration of the modem router using the web management page. This chapter contains the following sections: • LAN Settings • IPv6 LAN Settings •...

  • Page 45: Lan Settings

    Chapter 11 Specify Your Network Settings 11 1 LAN Settings 11 1 1 Change the LAN IP Address The modem router is preset with a default LAN IP 192.168.1.1, which you can use to log in to its web management page. The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on.

  • Page 46: Use The Modem Router As A Dhcp Server

    Chapter 11 Specify Your Network Settings 11 1 2 Use the Modem Router as a DHCP Server You can configure the modem router to act as a DHCP server to assign IP addresses to its clients. To use the DHCP server function of the modem router, you must configure all computers on the LAN to obtain an IP Address automatically.

  • Page 47: Reserve Lan Ip Addresses

    Chapter 11 Specify Your Network Settings 11 1 3 Reserve LAN IP Addresses You can view and add a reserved address for a client. When you specify an IP address for a device on the LAN, that device will always receive the same IP address each time when it accesses the DHCP server.

  • Page 48: Configure The Radvd Address Type

    Chapter 11 Specify Your Network Settings 11 2 1 Configure the RADVD Address Type Visit http://tplinkmodem.net, and log in with the password you set for the modem router. Go to Advanced > Network > Settings. Select IPv6 to configure IPv6 LAN parameters. 1 ) Select the RADVD address type to make the modem router assign IPv6 address...

  • Page 49: Wireless Settings

    Chapter 11 Specify Your Network Settings 1 ) Select the DHCPv6 Server address type to make the modem router assign IPv6 addresses to hosts. 2 ) Specify the Start/End IPv6 Address for the IPv6 suffixes. The modem router will generate IPv6 addresses within the specified range. 3 ) Keep Leased Time as the default value.
  • Page 50 Chapter 11 Specify Your Network Settings ¾ To enable or disable the wireless function: Enable the 2.4 GHz Wireless Network. If you don’t want to use the wireless function, just deselect the box. If you disable the wireless function, all the wireless settings won’t be effective.

  • Page 51: Use Wps For Wireless Connection

    Chapter 11 Specify Your Network Settings Go to Advanced > Wireless > Wireless Settings page. Select an option from the Security drop-down list. The router provides four options, None, WPA/WPA2 Personal (Recommended), WPA/WPA2 Enterprise, WEP. WPA2 uses the newest standard and the security level is the highest. We recommend you don’t change the default settings unless necessary.

  • Page 52: Schedule Your Wireless Function

    Chapter 11 Specify Your Network Settings Connect successfully will appear on the above screen, which means the client device has successfully connected to the modem router. Method 3 Enter the modem router’s PIN on your client device Use this method if your client device asks for the modem router’s PIN. Visit http://tplinkmodem.net, and log in with the password you set for the modem router.

  • Page 53: View Wireless Information

    Chapter 11 Specify Your Network Settings Set the time. Drag the cursor to cover the time area and click Save to make the settings effective. The selected time will be in red. Note: 1. Make sure that the time of the router is correct before using this function. For details, refer to Set System Time.

  • Page 54: Advanced Wireless Settings

    Chapter 11 Specify Your Network Settings Tips: You can also see the wireless details by clicking the router icon on Basic> Network Map. ¾ To view the detailed information of the connected wireless clients: Visit http://tplinkmodem.net, and log in with the password you set for the modem router.
  • Page 55 Chapter 11 Specify Your Network Settings • Beacon Interval: Enter a value between 25 and 1000 in milliseconds to determine the duration between which beacon packets are broadcasted by the router to synchronize the wireless network. The default is 100 milliseconds. •...

  • Page 56: Set Up A Dynamic Dns Service Account

    Chapter 11 Specify Your Network Settings (AP) in a wireless local area network (WLAN). Refer to Appendix: Troubleshooting detailed instructions. 11 4 Set Up a Dynamic DNS Service Account Most ISPs (Internet service providers) assign a dynamic IP address to the router and you can use this IP address to access your router remotely.
  • Page 57 Chapter 11 Specify Your Network Settings are for work, while others for entertainment. I want to isolate working devices from others while keep all devices’ access to the Internet. How can I 1 Visit http://tplinkmodem.net, and log in with the password do that? you set for the modem router.

  • Page 58: Create Static Routes

    Chapter 11 Specify Your Network Settings Done! Now your working devices connected to LAN1 and LAN3 are in an isolated group! Note: VLAN function is enabled by default. You cannot disable it when IPTV is enabled. 11 6 Create Static Routes A static route is a pre-determined path that network information must travel to reach a specific host or network.
  • Page 59 Chapter 11 Specify Your Network Settings 4 Click to add a new static routing entry. Finish the settings according to the following explanations: • Destination IP: The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of the router.

  • Page 60: Set Up A Vpn Connection

    Chapter 11 Specify Your Network Settings Router 2 and then to the Server, so the default gateway should be 192.168.1.2. • Interface: Determined by the port (WAN/LAN) that sends out the data packets. In the example, the data is sent to the gateway through the LAN port, so LAN should be selected.
  • Page 61 Chapter 11 Specify Your Network Settings Site A Site B Modem Router 2 WAN: 219.134.112.246 WAN: 219.134.112.247 Modem router 1 LAN: 192.168.1.1 LAN: 192.168.2.1 Subnetmask: 255.255.255.0 Subnetmask: 255.255.255.0 PC 1 PC 2 How can I 1 Make sure of the topology you want to build and record site do that? A (local network) and site B (remote network)’s LAN IP and WAN IP.
  • Page 62 Chapter 11 Specify Your Network Settings 3 ) In the IPSec Connection Name column, specify a name. 4 ) In the Remote IPSec Gateway (URL) column, Enter Site B’s WAN IP address. 5 ) Configure Site A’s LAN. In the Tunnel access from local IP addresses column, here we take...
  • Page 63 Chapter 11 Specify Your Network Settings Note: Make sure Site A and Site B use the same key. 9 ) Leave the Advanced Settings as default value. Then click to save. 3 Configuration on Site B (remote network). Refer to step 2 configuration on Site A and make sure that Site A and Site B use the same pre-shared keys...

  • Page 64: Set Up The Ipv6 Tunnel

    Chapter 11 Specify Your Network Settings Done! Now IPSec VPN is implemented to establish a connection. Note: 1. The product supports a maximum of ten simultaneous connections. 2. If one of the site has been offline for a while, for example, if Site A has been disconnected, on Site B you need to click Disable and then click Enable...

  • Page 65: Specify The 6Rd Tunnel With Parameters Provided By Your Isp

    Chapter 11 Specify Your Network Settings Note: If there is no available WAN connection to choose, make sure you have connected to the Internet and the connection type is not Bridge. Done! Now you can visit the IPv6 websites with the 6to4 tunnel. Note: Still not being able to access IPv6 resources means that not any 6to4 public server was found in your network.

  • Page 66: Chapter 12 Administrate Your Network

    Chapter Administrate Your Network This chapter introduces how to change the system settings and administrate your modem router’s network. This chapter contains the following sections: • Set System Time • Update the Firmware • Back up and Restore Configuration Settings •...

  • Page 67: Set System Time

    Chapter 12 Administrate Your Network 12 1 Set System Time System time is the time displayed while the modem router is running. The system time you configure here will be used for other time-based functions like Parental Controls and Wireless Schedule. You can manually set how to get the system time. Follow the steps below to set your system time.

  • Page 68: Update The Firmware

    12 2 Update the Firmware TP-Link is dedicated to improving and enriching the product features, giving you a better network experience. We will release the latest firmware at TP-Link official website, you can download the latest firmware file from our website: www.tp-link.com...

  • Page 69: Change The Administrator Account

    Chapter 12 Administrate Your Network Click Advanced > System Tools > Backup & Restore page. Click Browse to locate the previous backup configuration file, and click Restore. Wait for the restoring and then the modem router will automatically reboot. To reset the modem router to factory default settings Visit http://tplinkmodem.net, and log in with the password you set for the modem router.

  • Page 70: Local Management

    Chapter 12 Administrate Your Network Click Save to make the settings effective. 12 5 Local Management You can control the local devices’ authority to manage the modem router via Local Management feature. By default all local connected devices are allowed to manage the modem router.

  • Page 71: System Log

    Chapter 12 Administrate Your Network Tick the checkbox to enable Remote Management. Keep the Port as the default setting. Leave the IP/MAC Address field blank. If you just want to allow a specific device to manage the modem router, you can enter the IP address of the remote device in the IP/MAC Address field.
  • Page 72 Chapter 12 Administrate Your Network To view the system logs: You can view specific system logs by selecting the log Type and Level. Click Refresh to refresh the log list. To save the system logs: You can choose to save the system logs to your local computer or a remote server. Click Save Log to save the logs in a txt file to your computer.

  • Page 73: Monitor The Internet Traffic Statistics

    Chapter 12 Administrate Your Network 12 8 Monitor the Internet Traffic Statistics The Traffic Statistics page displays the network traffic of the LAN-WAN and WLAN- WAN sent and received packets, allowing you to monitor the volume of Internet traffic statistics. Visit http://tplinkmodem.net, and log in with the password you set for the modem router.
  • Page 74 Chapter 12 Administrate Your Network • Enable CWMP: Toggle On to enable the CWMP (CPE WAN Management Protocol) feature. • Inform: Enable this feature to send an Inform message to the ACS (Auto Configuration Server) periodically. • Inform Interval: Enter the time interval in seconds when the Inform message will be sent to the ACS.

  • Page 75: Snmp Settings

    Chapter 12 Administrate Your Network • Connection Request Path: Enter the path for the ACS server to log in to the router. • Connection Request Port: Enter the port that connects to the ACS server. • Connection Request URL: Enter the URL that connects to the ACS server. •...
  • Page 76 Chapter 12 Administrate Your Network • Enable SNMP Agent: Toggle On to enable the built-in SNMP agent that allows the router to operate as the operational role in receiving and processing of SNMP messages, sending responses to the SNMP manager, and triggering SNMP traps when an event occurs.

  • Page 77: Appendix: Troubleshooting

    Appendix: Troubleshooting T1 How do I restore my modem router’s configuration to its factory default settings? There are two ways to reset the modem router: • Method 1: Use the Reset button. For details, refer to the related button description. •...
  • Page 78 4 ) Click settings, deselect the following three options and click OK; 5 ) Go to Advanced > Restore advanced settings, click to save the settings.
  • Page 79 • Change a web browser or computer and log in again. • Reset the modem router to factory default settings. Note: You’ll need to reconfigure the modem router to surf the Internet once the modem router is reset. Open a web browser and log in again. If login fails, please contact the technical support.
  • Page 80 If you still cannot access the Internet, please restore your modem router to its factory default settings and reconfigure your modem router by following the instructions in Use Quick Setup Wizard. Please contact our Technical Support if the problem still exists. T5 How to configure MAC Clone? You can manually change the MAC address of the modem router.
  • Page 81 ¾ If you can find other wireless network except your own, follow the steps below: Check the Wi-Fi LED indicator on your wireless router/modem; Make sure your computer/device is still in the range of your router/modem, move closer if it is currently too far away; Go to Basic >...
  • Page 82 3 ) If it continues on saying network security key mismatch, it is suggested to confirm the wireless password on your modem router. Note: Wireless password/Network Security Key is case sensitive. 4 ) Connect to wireless network. Windows was unable to connect to XXXX /Cannot join this network/Taking longer than usual to connect to this network.
  • Page 83 Sharing Center > Change adapter settings. 2 ) Right-click your network connection (wired or wireless) and select Properties. 3 ) Double-click Internet Protocol Version 4 (TCP/IPv4). 4 ) Select both Obtain an IP address automatically Obtain DNS server address automatically, then click OK. 5 ) Click again to save your configuration.
  • Page 84 Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd.

  • Page 85: Ce Mark Warning

    CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. RF Exposure Information This device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
  • Page 86 Explanation of the symbols on the product label Symbol Explanation DC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

Table of Contents