Samsung MWR-WG00JN Service Manual page 18

Feature expansion specification
■ Wired remote control installation / service mode
1. If you want to use the various additional functions for your Wired Remote Controller, press the
the same time for more than 3 seconds.
• The password entry screen appears.
2. Enter the password, "0202," and then press the
• The settings screen for installation/service mode appears.
3. See the list of additional functions for the Wired Remote Controller on the next page, and then select the desired menu.
• Once you have entered the setting screen, the current setting appears.
• Refer to the chart for data setting.
• Using the , buttons, change the settings and press the button to move to the next setting.
• Press the button to save the new setting.
• Press the button to move to the Home screen.
• While setting the data, you can press the
pop-up screen.
NOTE
Service mode
0
Please enter your PASSWORD
button.
button to move to the Home screen after checking the saving status at a
2-15
Features and Specifications
and buttons at