Samsung MWR-WG00JN Service Manual page 19

Features and Specifications
Feature expansion specification
■ Installation/Service mode
• Unavailable functions are marked inactive and they cannot be set.
• If communication initialization is needed after the setting, the system will reset automatically and communication
NOTE
will be initialized.
Major Step 1
Indoor Unit
option
General
Connection
Information
View master Indoor Unit
Step 2
Power button
Auto mode
Cool/Heat selection
Wireless remote
controller
MAIN/SUB wired
remote
Temperature unit
Temperature unit
Set temp. Unit
Temperature sensor
selection
Average temperature
Set Temperature Type
Number of Connection
Ventilator
Serial No.
Model No.
Indoor unit room
Master Indoor Unit
Indoor unit EVA IN
Information
Indoor unit EVA OUT
Indoor unit EEV step
Ventilator
Mode master indoor Mode master indoor
unit
Step 3 Description
- Default/Indoor unit & Ventilation
- ON/OFF
- Cool Only/Cool & Heat
- ON/OFF
- Master/Slave
Celsius (°C)/Fahrenheit (℉)
Celsius (℃): 1℃/0.5℃/0.1℃,
Fahrenheit (℉): 1℉
- Indoor/Wired remote controller
- ON/OFF
- ON/OFF
Indoor
Temperature
temp.
Temperature
temp.
Temperature
temp.
EEV step
Indoor Address
Address
Address
unit 1)*
2-16
JN/KN
Indoor unit &
Ventilation
ON
Cool & Heat
ON
Master
Celsius (°C)
1℃
Indoor
OFF
ON
0 to 16 -
0 to 16 -
-
-
-
-
-
-
-
-
-
Default
UN
←
←
←
←
←
Fahrenheit(℉)
1℉
Wired remote
controller
←
←
-
-
-
-
-
-
-
-
-
-
-