Samsung MWR-WG00JN Service Manual page 28

Wired remote controller installation
■ Indoor tracking in wired remote controller
1 Tracking of your Wired Remote Controller will automatically start when you turn on the power after installation.
2 If you want to perform tracking again after installation, then press the and
than 5 seconds.
• The system will reset, and tracking will start again.
3 During tracking, the total number of currently searched indoor units and ventilator(ERV) will be displayed.
4 It may take about 5 minutes at initial installation or when you re-set the Master setting.
• The operation displays on the remote controller may differ depending on the selected language.
• If you want to perform tracking again after installation, then press the and
NOTE
than 5 seconds.
16
Scanning...
2-25
Features and Specifications
buttons at the same time for more
buttons at the same time for more