Advertisement
Available languages
Available languages
ENGLISH
8
Always check the sell-by date on the keg at purchase before
installing it.
Do not use the keg if the connection top is damaged. If the
connection top is damaged, the tap unit will not fit onto it.
Unopened kegs will keep best when stored at a stable
temperature.The cooler you store the keg, the better.
The keg is under pressure. Do not remove the connection top or
pierce the keg with a sharp object.
Maximum working pressure: 1.5 bar.
Use the keg only for the HD3600 PerfectDraft. Do not connect
other equipment to the keg.
Do not use kegs from other suppliers than the ones mentioned in
these instructions for use (see chapter 'Keg suppliers' at the end
of these instructions for use).
Do not use damaged kegs in this appliance, as this could harm the
appliance.A damaged keg should be immediately returned to the
shop where it was bought.
The kegs are not stackable.
Preparing for use
Step 1: installing the appliance
1
Put the appliance on a horizontal, even and stable surface,
leaving at least 10 cm free space behind and on both sides of
the appliance for the best performance.
Do not put the appliance in a place where it will be exposed to direct
B
sunlight or to high temperatures (e.g. close to a cooker or an oven).
C
2
You can store excess cord by pushing it into the storage
compartment at the back of the appliance.
3
Insert the plug into the wall socket.
C
4
Install the drip tray.
C
5
Attach the tap handle.
Advertisement
