INSTALLATION INSTRUCTIONS VOLT 6” Rotatable Undercover Hardscape ® VHS-6720-X-BBZ Important: Please Read Before Installation This fixture is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
Package Contents A. (1) Fixture Body Product Dimensions 1.5” 3.35” 8” Remove Lens Remove the lens from the luminaire by loosening the lock screws. Luminaire Lens Lock Screw customersupport@voltlighting.com • 813.978.3700 - 3 -...
Page 4
INSTALLATION INSTRUCTIONS VOLT 6” Rotatable Undercover Hardscape ® VHS-6720-X-BBZ Install Lamp Insert lamp with the correct wattage and type marked on the fixture label and push firmly into place. CAUTION: Do not exceed Lamp maximum wattage marked on luminaire label.
Page 5
Install Fixture to Mounting Surface Place the fixture body onto the desired location. Mark four points on the mounting surface using the holes of the mount Wall Anchor as a guide. Set the fixture aside and drill the proper holes where you placed the marks then insert the wall anchors into the drilled holes.
Page 6
INSTALLATION INSTRUCTIONS VOLT 6” Rotatable Undercover Hardscape ® VHS-6720-X-BBZ Adjust Luminaire Direction Set Screw Using an Allen Key, loosen the set screws on the side of the fixture to rotate luminaire to your desired direction by hand. Once you have the desired angle, tighten down the set screws with the Allen Key.
Need help?
Do you have a question about the VHS-6720-X-BBZ and is the answer not in the manual?
Questions and answers