Page 2
INSTALLATION INSTRUCTIONS VOLT RGBW BuddyPro™ Brass LED Puck Light ® VHS-6726-8-BRB Important: Please Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
Package Contents A. (1) Puck Light Parts Required (Sold Separately) A. (1) Transformer Product Dimensions 1.5” 0.75” *** NOTE*** PUCK LIGHT MUST BE MOUNTED IN AN INVERTED POSITION - FACING DOWNWARD Surface Mounted Attach the puck light to the flat surface (under railings, shelves, counters, benches, or any other niche SURFACE...
Page 4
INSTALLATION INSTRUCTIONS VOLT RGBW BuddyPro™ Brass LED Puck Light ® VHS-6726-8-BRB Recessed Mounted Using a 1.5” core drill bit, drill a hole in the desired flat surface. Attach the SURFACE puck light into the drilled hole and secure with lock screws.
Page 5
IR Remote (Optional) An IR Remote is optional for this fixture. The IR remote requires two AAA batteries. Remove the Battery compartment Cover Press the tab and lift the battery compartment cover to remove it from the IR Remote. Cover Backing IR Remote Install Two AAA Batteries...
Page 6
IR Remote Functions 1. On 2. Off 3. Brightness Control 4. 16 color selections 5. Flash A. Mode 1: Repeats Red, Green, Blue + color cycle for 1 second duration of each of FLASH the seven colors within this mode. STROBE A.
Need help?
Do you have a question about the VHS-6726-8-BRB and is the answer not in the manual?
Questions and answers