Table of Contents
Advertisement
7 .
To register a cordless receiver on the transceiver
To ensure the correct registration of the receiver on the hands-free module the times listed
below must be observed precisely.
If your times are too long or too short, the receiver will not be registered. In this case the
registration process must be repeated.
0
0
0
Retrofit / Installation kit No. 84 61 0 028 926
Installation Instructions No. 01 29 0 029 567
I
F 38 0256 2W
I
F 38 0252 2W
I
F 38 0256 2W
Issue date: 11.2001
- Position the slide switch in the eject box in
0
position "1"
- Turn the ignition key into position "1"
(terminal R)
- Wait for 15 seconds and then turn the ignition
key to position "0"
- Wait for approx. 2 seconds and then move the
0
slide switch in the eject box in position "0"
- Wait for a further approx. 2 seconds and
0
then move the slide switch in the eject box in
position "1"
EN/11
Advertisement
Table of Contents
