Gemini Tinytag Energy Logger Technical Manual page 33

Logging Interval
The Logging Interval option enables you to set how often
an energy logger will record (the minimum interval is 30
seconds).
Overwrite
Overwrite allows you to chose what happens when a logger
fills its memory.
If Run indefinitely is selected, the logger will overwrite its
oldest readings when it fills its memory, meaning that only
the most recent data recorded will be retained.
If Suspend logging is selected, the logger will stop recording
when full and preserve the data it has already stored.
Clear Old Readings
Clear Old Readings allows you to configure an energy logger
without losing the data already stored on it.
Selecting Clear old readings now will wipe the logger.
Configure
Once you have set up your logger as you wish it to record,
click the Configure button.
Do not disconnect the logger until software tells you it is
safe to do so.
Further Information
Further information on how to use Tinytag Explorer can
be found in the software's Help file by going to Help and
Contents.
33