Gemini Tinytag Energy Logger Technical Manual page 29

Starting Tinytag Explorer
To start Tinytag Explorer, click on the desktop icon
for the software:
If you didn't create a desktop icon when installing the
software, you can start the software by going to:
Start >> All Programs >> Tinytag Explorer 4.8 >> Tinytag
Explorer
Activating Tinytag Explorer
The first time you run Tinytag
Explorer you will be prompted to
activate the software.
The activation code for Tinytag
Explorer can be found on the
Tinytag Explorer CD case. It is
a set of 20 characters split up
into 5 blocks of 4.
If you have lost or misplaced your activation code, you can
request a new one from the Tinytag web site at
www.tinytag.info/activationcode
Enter the activation code into the box provided and choose
whether you want it to be applied to all the user accounts on
the computer.
Next click Confirm Code and you will see a message to
confirm that the code has been accepted.
Connecting to the Energy Logger
Plug the USB cable into your computer.
Turn on the energy logger (by pressing any of the buttons on
the front of the unit) and plug in the USB cable.
After a few moments Windows should inform you that the
logger has installed and is ready to use.
You will need Windows Administrator
access rights to activate the software
for all user accounts. If you do not have
Administrator access rights, leave the box
unchecked and the software will only be
enabled for the current user account.
29