Tinytag Explorer - Gemini Tinytag Energy Logger Technical Manual

14

Tinytag Explorer

Tinytag Explorer
The Tinytag Explorer software is used to reconfigure an
energy logger and to view recorded data.
The following takes you through the process of installing
Tinytag Explorer, the basics of configuring an energy logger
and downloading the data recorded by it.
Once Tinytag Explorer has been installed, you can find
further information in the software's Help file by going to
Help and Contents.
Installing Tinytag Explorer
• Place the Tinytag Explorer CD into the CD drive of your
PC.
The Tinytag Explorer Installer will run automatically after a
few seconds and present you with a Welcome screen. If the
Tinytag Explorer Installer does not run automatically, open
Windows Explorer, navigate to your CD drive and double-
click tinytag.msi.
• Click Next to start the installation.
• Review the software's license agreement and if you
accept the terms click I accept the terms in the License
Agreement, then Next.
• You will then be asked where you want to install the
software (we recommend you use the default installation
path) and whether you would like a shortcut for the
software to be created on your desktop. Once you have
made your choices, click Next, then Install.
• The software will then install automatically. If you
are using Windows Vista or Windows 7 you may be
prompted to confirm your agreement to the installation.
When you see the Installation Complete screen, click
Finish.
• Once the installation is complete, you will be asked to
restart your computer, click Yes to do this.
To install Tinytag Explorer, you will need to
have Windows Administrator access rights
on the PC you are using.
28