Page 2
Step 1 - Attach the 821 DC power adapter to the 821W Injector unit and to your AC outlet. The Power LED will indicate the unit is receiving power as well as the 821W 56V 65W DC Power Adapter green LED. ...
Page 3
Attach your local LRP Interlink cabling end to the 821W Waterproof Injector unit LRP Interlink port – Then do the same for the remote end and plug into the 821W Waterproof Extender unit LRP Interlink port. The Interlink side Green Sync LED should be solid, indicating is sees the remote partner.
First examine the backbone wiring pair and make sure you have solid connections. The LRP Interlink Sync LED will be lit solid Green on each 821W Waterproof unit. The units sync instantly and have no delay. if either fail to light up…. Then follow the steps below: 1) Make sure your wiring is straight through and not connected to any Telco punch down blocks;...
Page 5
Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
Page 6
USING THE PRODUCT. 2. LIMITATION OF LIABILITY. IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER, OR ANY THIRD PARTY, FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE SALE OR USE OF THE PRODUCT (INCLUDING...
Need help?
Do you have a question about the 821W and is the answer not in the manual?
Questions and answers