Enable-IT 824 Quick Start Manual

Enable-IT 824 Quick Start Manual

Gigabit ethernet extender

Advertisement

Quick Links

!
Enable-IT 824

Gigabit Ethernet Extender
Quickstart Guide
Professional Grade Networking
All Rights Reserved © 1997 - 2018 Enable-IT™, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 824 and is the answer not in the manual?

Questions and answers

Summary of Contents for Enable-IT 824

  • Page 1 Enable-IT 824
 Gigabit Ethernet Extender Quickstart Guide Professional Grade Networking 
 All Rights Reserved © 1997 - 2018 Enable-IT™, Inc.
  • Page 2 Follow the steps below to perform the Out Of the Box Test.
 
 Step 1 - Attach the 12V DC power adapter to each 824 unit and power up the units. The Power LED 
 will indicate the unit is receiving power.
 
...
  • Page 3 Attach the power adapters to both 824 units. Attach your local Interlink cabling end to the 824 CO unit Interlink port – Then do the same for the remote end and plug into the 824 CPE unit Interlink port. The Interlink side Green Sync LED should be solid, indicating is sees the remote partner.
  • Page 4 First examine the backbone wiring pair and make sure you have solid connections. The Interlink Sync LED will be lit solid Green on each 824 unit. The units sync instantly and have no delay. if either fail to light up…. Then follow the steps below: 1) Make sure your wiring is straight through and not connected to any Telco punch down blocks;...
  • Page 5 Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use this support website as your first source for help as it contains an on-line knowledge base of articles, documentation, FAQ's and other problem-solving resources.
  • Page 6 Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
  • Page 7 
 2. LIMITATION OF LIABILITY. IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER, OR ANY THIRD PARTY, FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE SALE OR USE OF THE PRODUCT (INCLUDING...
  • Page 8 Sales and Customer Care: Toll Free US and Canada 888 309-0910 866 389-8605 Fax Other International +1 702 924-0402 +1 702 800-2711 Fax E Mail sales@enableit.com support@enableit.com RMA Support: https://support.enableit.com All Rights Reserved © 1997 - 2018 Enable-IT™, Inc. Page ! of !

Table of Contents