Page 2
Installation The Enable-IT 828 – A Dual Output Gigabit PoE Extender Unit has a distance restriction of 800ft or 240m over 4-pair Category 5e or higher spec rated wiring. Or multiple 828 units can be daisy chained with PoE to reach up to 2,000ft or 1,828m. ...
Page 3
For a more detailed test and to confirm your LAN Equipment works with the 828 units, connect your Ethernet LAN to the PoE injector LAN in port and then test LAN port and test connectivity all the way end to end.
Page 4
Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use this support website as your first source for help as it contains an on-line knowledge base of articles, documentation, FAQ's and other problem-solving resources.
Page 5
Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
Page 6
TRANSMITTED USING THE PRODUCT. 2. LIMITATION OF LIABILITY. IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER, OR ANY THIRD PARTY, FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE SALE OR USE OF THE PRODUCT...
Need help?
Do you have a question about the 828 and is the answer not in the manual?
Questions and answers