Page 2
Test. Step 1 - Attach the 821 DC power adapter to the 821C Injector unit and to your AC outlet. The Power LED will indicate the unit is receiving power as well as the 821 Power Adapter. ...
Page 3
Attach your local LRP Coax Interlink cabling end to the 821C Injector unit LRP Coax Interlink port – Then do the same for the remote end and plug into the 821C Extender unit LRP Coax Interlink port. The Interlink side Green Sync LED should be solid, indicating is sees the remote partner.
Page 4
Online Technical Services The Enable-IT Support Portal is available 24/7 to open a ticket or check the status of one. Please use this support website as your first source for help as it contains an on-line knowledge base of articles, documentation, FAQ's and other problem-solving resources.
Page 5
Remedies for Breach of Warranty. In the event of a breach of the foregoing warranty, Enable-IT will, in its sole discretion and at its cost, and subject to the terms of the following paragraph, repair the non-conforming Product, replace the non-conforming Product with a new or reconditioned Product or refund the purchase price for the Product.
Page 6
USING THE PRODUCT. 2. LIMITATION OF LIABILITY. IN NO EVENT SHALL ENABLE-IT BE LIABLE TO THE END USER, OR ANY THIRD PARTY, FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH OR ARISING OUT OF THE SALE OR USE OF THE PRODUCT (INCLUDING...
Need help?
Do you have a question about the 821C and is the answer not in the manual?
Questions and answers