Advertisement
Table of Contents
- 1 Installing the 821Cwp Outdoor Poe Extender
- 2 Performing the On-Site Installation
- 3 Building the 821CWPLRP Interlink Wiring
- 4 Cabling Devices to the Enable-IT 821CWP Extended Ethernet Kit
- 5 Troubleshooting
- 6 Technical Support
- 7 Returning Products for Warranty Repair
- 8 Returning Products for Refund
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Enable-IT 821CWP
Summary of Contents for Enable-IT 821CWP
- Page 1 Enable-IT 821CWP Coax Outdoor PoE Extender Quickstart Guide Professional Grade Networking All Rights Reserved © 1982 - 2024 Enable-IT™, Inc.
- Page 2 Box Test. Step 1 - Attach the 360 PoE Injector to the 821CWP Injector unit and to your AC outlet. The Power LED will indicate the unit is receiving power as well as the 360 56V 61W PoE Injector green LED.
- Page 3 First examine the backbone wiring pair and make sure you have solid connections. The LRP Interlink Sync LED will be lit solid Green on each 821CWP unit. The units sync instantly and have no delay. if either fail to light up…. Then follow the steps below: 1) Make sure your wiring is straight through and not connected to any Telco punch down blocks;...
- Page 4 Returning Products for Warranty Repair Enable-IT warrants to the original purchaser of this described Product ("you" or the "End User") that, for the limited lifetime period commencing on the date the Product was purchased (the “Warranty Period"), the Product will be substantially free from defects in materials and workmanship under normal use and conditions.
Need help?
Do you have a question about the 821CWP and is the answer not in the manual?
Questions and answers