This manual contains text, diagrams and explanations which will guide the reader in the correct
installation, safe use and operation of the F94*GOT-*WD-E and should be read and understood before
attempting to install or use the unit. Further information can be found in the associated manuals list below.
Specifications are subject to change without notice
Guidelines for the Safety of the User and Protection of the
F94*GOT-*WD-E
This manual has been written to be used by trained and competent personnel. The definition of such a
person or persons is as follows:
a) Any engineer using the product associated with this manual, should be of a competent nature,
trained and qualified to the local and national standards. These engineers should be fully aware of
all aspects of safety with regards to automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and qualified to
the local and national standards.
c) All operators of the completed equipment should be trained to use that product in a safe and
co-ordinated manner in compliance to established safety practices.
Note: The term 'completed equipment' refers to a third party constructed device which contains or uses
the product associated with this manual.
Note's on the Symbols Used in this Manual
At various times through out this manual certain symbols will be used to highlight points of information
which are intended to ensure the users personal safety and protect the integrity of equipment.
1) Indicates that the identified danger WILL cause physical and property damage.
2) Indicates that the identified danger could POSSIBLY cause physical and property
damage.
•
Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage
that may arise as a result of the installation or use of this equipment.
•
All examples and diagrams shown in this manual are intended only as an aid to understanding the
text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for actual use of the
product based on these illustrative examples.
•
Owing to the very great variety in possible application of this equipment, you must satisfy yourself as
to its suitability for your specific application.
Associated Manuals
Manual Name
F940GOT Series
(F94*GOT-*WD-E)
Installation Manual
GOT-F900
OPERATION MANUAL
(describes GT Designer2)
GOT-F900 Series
Operation Manual
GOT-F900 Series
Hardware Manual
(connection diagram)
GT Designer2 Version1
Operating Manual
GT Designer2 Version1
Reference Manual
GT Designer
Operating Manual
FX-PCS-DU/WIN-E
SOFTWARE MANUAL
F9GT-40FMB
User's Manual
Manual Number
JY997D94201
JY992D09101
(separate volume)
JY992D94701
(separate volume)
JY992D94801
(separate volume)
(PDF files on CD-ROM
included with product)
(PDF files on CD-ROM
included with product)
Included with the screen
creation software
JY992D68301
(included with the screen
creation software)
JY992D98601
F940GOT Series(F94*GOT-*WD-E)
Installation Manual
JY992D94201E
Description
Describes the specifications, wiring, and
installation of F940GOT Series graphic
operation terminal. (hardware)
Describes the operation and use of the GOT-
F900 Series graphic operation terminals and
GT Designer2.
Describes the operation and use of the GOT-
F900 Series graphic operation terminals, GT
Designer and FX-PCS-DU/WIN-E.
Describes wiring and installation of the GOT-
F900 Series graphic operation terminals.
Describes the operation of GT Designer2
(SW*D5C-GTD2-E) and data transfer to the
GOT-900 Series.
Describes the specifications and setting of
object functions in GT Designer2 (SW*D5C-
GTD2-E).
Describes the operation of GT Designer
(SW*D5C-GOTR-PACKE) and data transfer to
the GOT-900 Series. (Refer to the help file)
Describes the operation of FX-PCS-DU/WIN-
E screen creation software.
This manual contains explanations for
installation and operating procedure of F9GT-
40FMB data transfer adapter.