Whirlpool 8527902 Installation Instructions Manual page 10

Three-wire connection...
Page 1O
Three-wire receptacle
Where local codes permit
connecting cabinet-ground conductor to neutral wire:
4.
Loosen or remove center
terminal block screw,
oS; c °nqn;Co ;;en u %eJ h e<
the center, silver-colored terminal
screw of the terminal block,
Tighten screw,
6.
Connect the other wires to
outer terminal block screws,
Tighten screws,
7. Tighten strain relief screws, i*_"'_i
8. Insert tab of terminal block __i _
cover into slot of dryer rear panel, - _,_,
Secure cover with hold-down _._.
screw,
Where local codes permit
connecting cabinet-ground conductor to neutral wire:
4.
Loosen or remove center,
terminal block screw.
5. Place the hooked end of the
neutral wire (white or center) of
power supply cable under the center
screw of the terminal block (hook
facing right). Squeeze hooked end
together. Tighten screw.
6.
Place the hooked ends of the
other power supply cable wires
under the outer terminal block
screws (hook facing right). Squeeze
hooked endstogether. Tighten
_=-%,
screws.
7.
Tighten strain relief screws.
8. Insert tab of terminal block cover
into slot of dryer rear panel. Secure _ -_
cover with hold-down screw.