Table of Contents
Advertisement
Printer Authorization Matrix Form
Enter the characters (below) supplied by the planner in the appropriate groups on your
display screen. If a group already is displayed as AA M XXXX YYYY YYYY, your entry
will overwrite these characters. When you have completed all your entries, move the cursor
to the zero after sequence number 901 at the bottom of the screen, change it to a 1, and
press ENTER. Any entry that is not valid will be intensified at this time and the 1 you
entered will change back to a 0 (zero). Correct the invalid entry, and return to 901.
Again, change the zero to a 1 and press ENTER. When all entries are valid, the printer
authorization matrix display will be replaced by the next customizing sequence number.
(If, at any time during this procedure, you wish to return to the original matrix, change
the 0 (zero) after the 901 to A, and press ENTER.) Return to your original instructions.
To delete an entry, move the cursor (with cursor-move keys) to the leftmost position of
the entry (the Printer Port Address) and press the spacebar twice. The entire matrix, or
as many entries as desired, can be deleted in this manner. After all changes have been
made, press ENTER. All deleted entries will be displayed as AA M XXXX YYYY YYYY.
When the matrix is satisfactorily defined, move the cursor to the zero after sequence
number 901, change it to a 1, and press ENTER.
1 )
2)
3)
4)
5)
6)
7)
8)
9)
10)
11 )
12)
13)
14)
15)
16)
Printer
Port
Address
Printer
Mode
~~
A
A
M
X
Printer
Class
Assignment
X
X
X
Source
Device
List
....
,
Y
y
Y
Y
Y
Y
Y
Y
Chapter 5. Modification Procedure
5-1~
Advertisement
Table of Contents
