Chapter 3. Preparing to Customize
This chapter supplies the necessary information to permit the planner to fill in the Initial
Customizing Procedure Form in Chapter 4. Chapter 3 is divided into three groups,
according to model number. The first group contains information for customizing the
3274 Model lA; the second, for customizing the 3274 Models IB and ID; and the third,
for customizing the 3274 Models 1 C and 51 C. Select the group that applies to the model
to be customized, and f111 in the replies in step 8 of the Initial Customizing Procedure
Form in Chapter 4. The sequence numbers are listed here and on the form in numerical
order; however, they may not be displayed on the 3278 or 3279 screen in numerical
order. Although all sequence numbers are listed in each group, only those required for the
model being customized are explained. All others instruct the planner to fill in a zero
response on the Initial Customizing Procedure Form. This is necessary because all
sequence numbers will be displayed to the operator after the responses are keyed in. The
sequence numbers that are not applicable to the model being customized will be filled in
with zeros on the 3278 or 3279 screen.
Otapter 3. Preparing to Customize
3-1