Appendix C: Troubleshooting Configurations with Disks
Step
Action
13
Answer the prompts in the setup program, either through the
command line or the Web interface, using the information that you
recorded in the setup parameters worksheet in the Data ONTAP
Software Setup Guide.
14
After the setup script is complete, do the following:
◆
Assign additional disks, array LUNs, or both to the gateway (see
"Assigning disks and array LUNs to the
◆
Install protocol and features licenses.
◆
Install and download Data ONTAP software, following the
instructions in the Data ONTAP Software Setup Guide.
15
If you have an HA pair, repeat this same procedure on the other node.
gateway" on page 60).
83