IBM System Storage N Series Implementation Manual page 48

34
Step Action
7 Add any missing licenses by entering the following command for
each missing license:
license add
xxx is the license code for the product.
8 Use the
disk assign
of array LUNs and additional disks.
See "Assigning disks and array LUNs to the
information about the
Note
If the
disk.auto_assign
ONTAP automatically assigns new disks to your system. However,
you must explicitly assign array LUNs to your system.
9 Set up Data ONTAP features, as applicable, using guides in the
gateway and Data ONTAP library.
xxx
command to specify this gateway as the owner
disk assign
option is enabled (the default), Data
gateway" on page 60 for
command.
Installing a gateway with disk shelves