IBM System Storage N Series Implementation Manual page 71

storage show disk
-T output
Chapter 6: Managing a System with Disks and Array LUNs
You can use the
storage show disk
about all the disks and array LUNs connected to your gateway. When the
option is used with the
(If your output from the
adding the option either before or after
-x
.)
-T -x
In the following
storage show disk -T
are for Fibre Channel disks and the bottom entries are for array LUNs.
command to display attribute information
storage show disk
storage show disk -T
-T
command output, the topmost entries
command, the "disk" type is shown.
command is truncated, try
—for example,
storage show disk
-T
57