Gateway specific requirements for Multipath Storage
System
requirements
HA pair type
requirements
Disk shelf
requirements
Appendix B: Setting up and Managing Multipath Storage
Multipath Storage is supported on all gateways that support native disk shelves.
See the gateway Interoperability Matrix for a list of the gateways supported.
Multipath Storage is available for the following types of gateway HA pairs:
◆
Standard HA pairs
◆
Mirrored HA pairs
Note
The gateway does not support MetroCluster with native disk shelves.
See the gateway Interoperability Matrix for a list of the combinations of disk
shelves and modules supported in HA pairs with Multipath Storage.
Note
Only AT-FCX modules shipped in December 2005 or later support Multipath
Storage for HA pairs. If you are unsure whether your module is the correct
version, see the Data ONTAP High Availability Configuration Guide or Data
ONTAP Active/Active Configuration Guide for the procedure for checking the
version of the AT-FCX module.
67