IBM System Storage N Series Implementation Manual page 54

Step Action
7 Assign array LUNs to the gateway
now or later.
8 Configure aggregates on your system.
40
Details
See "Assigning disks and array LUNs to the
on page 60 for details about the disk assign command.
Follow the guidelines in
storage types in an aggregate" on page 21.
Example: The following command creates an
aggregate called vs23b3b_vol1 with four FCAL disks
in it:
aggr create vs23b3b_vol1 -T FCAL -n 4
See the Data ONTAP Storage Management Guide for
details about creating aggregates for disks.
gateway"
"Restrictions on mixing
Overview of adding a new disk shelf