Advertisement
Connected Grid Module (CGM) WPAN-OFDM-FCC Module - Cisco IOS
Related Documentation
Table 5
New CLI Interface commands for the CGM-WPAN-OFDM-FCC Module
Command
ieee154 phy-mode <64|96|66|98|144|146|147|149|
150|192>
ieee154 txpower <-65 - 35 >
[no] rpl dag-lifetime <15 -255>
[no] rpl storing-mode
Related Documentation
Release Notes for Cisco Resilient Mesh Release 5.7.27
Release Notes for Cisco Resilient Mesh Release 5.6.21
Definition
Defines the IEEE154 phy-mode. Possible options noted
below, default value is 149.
64: Rate=50 kb/s; Modulation=2FSK; Modulation
Index=1.0; FEC=OFF; Channel Spacing=200 kHz
96: Rate=50 kb/s; Modulation=2FSK; Modulation
Index=1.0; FEC=ON; Channel Spacing=200 kHz
66: Rate=150 kb/s; Modulation=2FSK; Modulation
Index=0.5; FEC=OFF; Channel Spacing=400 kHz
98: Rate=150 kb/s; Modulation=2FSK; Modulation
Index=0.5; FEC=ON; Channel Spacing=400 kHz
144: Rate=50 kb/s; Modulation=OFDM; Option=2;
MCS=0; Channel Spacing=800 kHz
146: Rate=200 kb/s; Modulation=OFDM; Option=2;
MCS=2; Channel Spacing=800 kHz
147: Rate=400 kb/s; Modulation=OFDM; Option=2;
MCS=3; Channel Spacing=800 kHz
149: Rate=800 kb/s; Modulation=OFDM; Option=2;
MCS=5; Channel Spacing=800 kHz
150: Rate=1200 kb/s; Modulation=OFDM; Option=2;
MCS=6; Channel Spacing=800 kHz
192: Rate=6.25 kb/s; Modulation=OQPSK; Chip
Rate=100 kp/s; Rate Mode=0; Channel Spacing=200 kHz
Enter a value between -65 and 35, where 25 is the default
transmission power value.
Enter a value between 15 and 255 seconds, where 120 is
the default.
Enter command to enable RPL storing mode on the
interface. Enter no rpl storing-mode to disable the
command.
8
Advertisement
