Draught Problems - hergom BENNINGTON Manual

These same distances may be respected when the covering of walls or nearby areas
is susceptible to damage or deformity by the temperature (varnishes, paints, P.V.C., etc.).
DISTANCES TO SURFACES
SINGLE WALL CONNECTOR
DOUBLE WALL CONNECTOR
Below is a list of the problems common to any type of stove. All of these problems
can be corrected and sometimes only require a small readjustment for the stove to return to
its normal working order.
Remember that weather affects the operating of your stove.
If your stove leaks smoke inside the house, the most likely is the following:
-If your chimney is newly built:
a) The draught is insufficient.
b) The section or height is not appropriate.
c) There is a bottleneck somewhere in the chimney.
-If the chimney already existed:
a) The chimney is partially blocked by soot.
b) There is internal or external breakage where air is getting in.
c) There is less section or height than required by the new appliance.
Please go to Chapter II- INSTALLATION and carefully read Section B.- CHIMNEYS.
PARALLEL WALLS
A B C
300 460 680
300 400 680
%(11,1*721
',67$1&(6 )520
&20%867,%/( 685)$&(6
Fig. 15

7.- DRAUGHT PROBLEMS

D E F G
500 460 840 350
450 460 840 300
SLANTING
WALLS
H J K L
230 330 600 1700
230 330 600 1650