Table of Contents
Advertisement
5. PLANNED MAINTENANCE CHECKLIST
It is recommended that you contact your AccuTemp authorized service provider to setup a planned
maintenance program to keep your appliance operating in the most efficient manner. AccuTemp
recommends a minimum of a yearly schedule.
Verify that the appliance is level and properly located under the
hood.
Verify that the temperature controller is working properly and
that there are no rips in the label.
Check that the splash shield at the top of the control panel is
under the rail provided. If not water and or grease can migrate
into control panel.
Inspect the control compartment for foreign particulate and any
loose wiring or connections.
Check that the power supply cord is not frayed, outer covering
is not degraded or any bare cooper is visible. Replace if required.
Verify amp draw to listed amp requirements on the data tag of
the appliance.
If on an AccuTemp Stand verify mounting fasteners are in place
and tight. If not correct. If the stand has casters check that
the wheels are intact and that they are mounted correctly. If
grease covered clean with a mild detergent and clean water.
Dry completely. Apply a food grade silicone to the locking
mechanism.
Complete a 9 point temperature test to check for even
temperature across the surface of the cooking surface.
Check for grease buildup in the grease drawer container and
clean it with a damp towel saturated with a mild detergent and
clean water. Dry with a clean dry towel.
After all metallic areas are cool to the touch, clean external
metal surfaces except the cooking surface. With a damp clean
towel saturated with a mild detergent and clean water. Dry with
a clean dry towel.
Season the cooking surface as outlined in this manual.
MP5018-1912
PM TASK DESCRIPTION
Accu-Steam Electric Griddle
Daily
Biannual Yearly
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
25
Advertisement
Table of Contents
