Sun Microsystems N2000 Series Quick Installation page 2

For remote management applications over Telnet,
4b
connect to the out-of-band 10/100 MGMT port.
PC to Ethernet hub or switch
Log in from console, enter config mode, and enable
management access.
6
username> admin
password> admin
sun> enable
sun> config
sun (config)# switchServices
...switchServices)# httpd enabled
...switchServices)# tftpd enabled
...switchServices)# telnet enabled
For remote Web interface access:
1. Open Web browser.
2. Choose File > Open.
3. Enter HTTP://10.10.1.1.
See Chapter 1
Sun N2000 Series System Administration Guide
Sun N2000 Series Release 2.0 -
Quick Installation (continued)
Default Management IP
SunSN: 0312HH173C SERIAL MGT NET MGT 5x 7 9 11 13 15 17 19 21 23 25
6 8 10 12 14 16 18 20 22 24 26
1 2 3 4
10.10.1.1
SF 1
SF 2
255.0.0.0
Ethernet UTP
straight-through cable
5
Connect network cables.
SERIAL MGT NET MGT 5x 7 9 11
SunSN: 0312HH173C
6 8 10
1 2 3 4
SF 1
SF 2
Ethernet multimode (short wavelength)
fiber-optic cable
See Chapter 3
Sun N2000 Series Hardware Installation and
Startup Guide
7
Configure the system.
Refer to the Technical Documentation CD to:
- Configure system vSwitch, management vRouter,
shared vRouter, IP routing, and interfaces.
- Configure operator-defined vSwitches, real and
virtual services, server health checks, SSL, etc.
- Administer the system.
Copyright 2004, Sun Microsystems, All rights reserved.
13 15 17 19 21 23 25 27 29 31 33 35 37 39
12 14 16 18 20 22 24 26 28 30 32 34 36 38 40
Ethernet UTP Cat 5
or 5E cable
Part Number: 817-7640-10
October 2004, Revision A
Sun Microsystems, Inc.
www.sun.com