Emerson Rosemount 848T Reference Manual page 26

Wireless temperature transmitter

Hide thumbs Also See for Rosemount 848T:

Table of Contents

Installation

September 2019

Figure 3-4: Sensor Wiring Connections

Refer to

3.3.1

0-10 Volts inputs

The 848T Wireless voltage adapter allows voltage measurement from 1-10 volts. For this

capability, one or two adapters are required. Each adapter accommodates two voltage

inputs, and can be installed interchangeably on inputs 1 and 2 or 3 and 4.

To install voltage adapter:

Procedure

1. Open terminal screws 2 and 3 on BOTH inputs.

2-wire RTD, ohm

4-wire RTD, ohm

3-wire RTD, ohm

Thermocouple, millivolt

Grounding practices

for more information on sensor grounding practices.

Note

The screws are captive and should NOT be completely removed by using excess

force.

Reference Manual

00809-0100-4848

Emerson.com/Rosemount

Table of Contents