Siemens CP 342-5 Manual page 27

Table 1- 4 Consistency range in DP master mode
Access method in the user program
Variant 1
Variant 2
Table 1- 5 Consistency range in DP slave mode
Access method in the user program
Variant 1
Variant 2
Note on 9: Program blocks for the DP mode
Program blocks with the current version of STEP 7 ship with the CP 342-5 / CP 342-5 FO
described here. In the following table, you can see how you can use these block versions
and the previous block versions for the available modules:
Program block type
(version)
< V3.0
>= V3.0
Note
Current program blocks
We recommend that you always use the latest block versions for all module types.
You will find information on the current block versions and the current blocks for downloading
in Siemens Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15673/pm)
This recommendation assumes that you are using the latest firmware version for the
particular module type.
Further information
Refer to the documentation of the program blocks in the online help of STEP 7 or in the
manual /4/ (Page 48)
CP 342-5 / CP 342-5 FO
Manual, 07/2017, C79000-G8976-C146-10
can be used with module type CP 342-5 with order no. 6GK7 342-
-5DA00-0XE0 -5DA01-0XE0
● ●
● ●
1.6 Compatibility with the previous product
maximum area size with data consistency
2160 bytes
32 bytes
maximum area size with data consistency
240 bytes
32 bytes
-5DA02-0XE0
configured as ..DA00
or ..DA01
●
●
Application and functions
-5DF00-0XE0
-5DA02-0XE0
-5DA03-0XE0
●
27