Saeco 740823349 Operating Instructions Manual page 44

44 PROGRAMMING MACHINE FUNCTIONS
This is a factory-set function that automatically
switches the machine into "Standby" when 3 hours
have elapsed since a coffee was dispensed.
The function is disabled when the "CLOCK"
function is on.
The switch-off time can be adjusted, in 15-minute
intervals, to a minimum of 15 minutes.
This function is used to rinse all the coffee-
dispensing parts with water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
Warning: a large quantity of water may be discharged
from the coffee brew unit. Before starting, empty out
the drip tray and keep an additional container handy.
This function is used to carry out an automatic
descaling cycle. See Page 34.
A person must be present during this operation.
TIME SETTINGS
CLOCK
ON/OFF TIME
TIME SETTINGS
TIMER
Select the MENU. When the function ap-
pears, select it using the
"OK" button.
CLEANING
CLEANING CYCLE
DESCALING CYCLE
CLEANING
Select the MENU. When the function ap-
pears, select it using
the "OK" button.
CLEANING
CLEANING CYCLE
DESCALING CYCLE
CLEANING
Select the MENU. When the function ap-
pears, select it using the
"OK" button.
TIMER TIMER
3:00 1:15
Use the buttons to Press the "OK" button to
adjust the timer setting. confi rm your choice.
CLEANING CYCLE CLEANING CYCLE
YES YES
NO NO
Choose whether to Press the "OK" button
enable or disable the to confi rm your choice.
rinsing cycle.
DESCALING CYCLE
DESCALING CYCLE
YES YES
NO NO
Choose whether to Press the "OK" button to
enable or disable the confi rm your choice.
descaling cycle.