Siemens SIMATIC PCS 7 BOX Manual page 33

5. Click on the "Next" button until you get to the settings for the OPC server.
Deactivate the option "SIMATIC NET OPC server in configure PC station" and
click on "Next".
6. Close the SIMATIC NET Commissioning Wizard by clicking once again on the
"Next" button.
7. Confirm the "SIMATIC NET Commissioning Wizard" warning dialog that
appears by clicking "OK".
8. In the next two dialogs of the SIMATIC NET Commissioning Wizard, click on
"Next" and then on the "Finish" button.
9. When the settings made in the Commissioning Wizard are saved, the "Set PC
Station" configuration console appears. Close the "Set PC Station"
configuration console.
Note
You can call up the "Set PC Station" configuration console with the Windows
command Start > Simatic > SIMATIC NET > Settings > Set PC Station and
change the operating mode of the employed module at a later time if needed.
Additional Information
Manual PC Configurations and Authorizations
Process Control System PCS 7 - PCS 7 BOX
A5E00272813-01
Commissioning and Configuration
4-3