Planning The Installation; Important Safety Instructions - Access ROYALE Installation & Operating Instructions Manual

Whirlpool bathtubs
Table of Contents

Advertisement

INSTALLATION INSTRUCTIONS & OWNER'S MANUAL
BEFORE BEGINNING INSTALLATION, CHECK THE FOLLOWING ITEMS
CHECK ENTIRE UNIT FOR CONCEALED DAMAGE. If there is any damage, DO NOT INSTALL!
Shipping damages must be reported to the carrier immediately. All damage must be discovered
and reported prior to installation in order to have it covered under the warranty!
COMPARE COLOR OF UNIT WITH OTHER FIXTURES. If color is not sufficiently compatible with
fixtures, DO NOT INSTALL!
1.
Make certain the floor structure is level and adequate to support installation. See floor loading in
tub specifications.
2.
Building codes require that a panel(s) be constructed to allow ample clearance for plumbing repairs
and pump service or removal. (Please refer to your local codes for regulations.)
3.
Using the tub itself, or installation drawings, measure and mark locations for waste pipe, water
supply, wiring runs, and service access.
WARNING!
Examine all plumbing for damage and water test before final installation. If
damage has occurred, call our Technical Service Department at 877-249-2388.
WARNING!
Alterations or modifications of the plumbing system without expressed written
authorization will invalidate all warranty claims.
WARNING!
Installation must comply with current local and state building, plumbing, and
electrical codes.
WARNING!
It is the responsibility of the installer or owner to determine code requirements
prior to installation.
WARNING!
Connections should be made by licensed plumbers and electrician.
* Do Not lift by plumbing at any time! Lift by the tub deck.
* Tub must be supported by the subfloor and bedding, not by the tub lip.
* Run pump and test all functions and plumbing prior to finishing installation.
* Run pump only when water in tub is two inches over jets.
Any modifications to the plumbing system, including the pump, will void the warranty and approvals.
PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, AND INJURY.
(Refer to individual model sheets for specifications)
AND READ THE INSTRUCTIONS CAREFULLY.

PLANNING THE INSTALLATION

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions and save these instructions.
IMPORTANT INSTRUCTIONS:
The plumbing system on all ACCESS Tubs meets ASME, and UL standards.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS!

Advertisement

Table of Contents
loading

Table of Contents