Mercedes-Benz Sprinter 2003 Manual page 189

FUEL LEVEL SENSOR OPEN/SHORT TO BATTERY —
TEST
4 Turn the ignition off.
Disconnect the Fuel Pump Module harness connector.
Disconnect the Instrument Cluster C1 harness connector.
Measure the resistance of the Fuel Level Sensor Signal (+) circuit between the Fuel
Pump Module harness connector and the Instrument Cluster harness connector.
Is the resistance above 10 ohms?
Yes → Repair the Fuel Level Sensor Signal (+) circuit for an open.
→ Replace the Instrument Cluster in accordance with the Service
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Information.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
181
Continued
APPLICABILITY
All