Mercedes-Benz Sprinter 2003 Manual page 186

INSTRUMENT CLUSTER
AMBIENT TEMP SENSOR OPEN/SHORT TO BATTERY —
TEST
4 Turn the ignition off.
Disconnect the Instrument Cluster C1 harness connector.
Disconnect the Ambient Temperature Sensor harness connector.
Measure the resistance of the Ambient Temperature Sensor Signal (+) circuit
between the Instrument Cluster C1 harness connector and the Ambient Temperature
Sensor harness connector.
Is the resistance above 10 ohms?
Yes → Repair the Ambient Temperature Sensor Signal (+) circuit for an
→ Replace the Instrument Cluster in accordance with the Service
No
ACTION
open.
Perform BODY VERIFICATION TEST - VER 1.
Information.
Perform BODY VERIFICATION TEST - VER 1.
178
Continued
APPLICABILITY
All