AIR OUTLET TEMP SENSOR SHORTED LOW (ACTIVE) —
TEST
4
Turn the ignition off.
Disconnect the Air Outlet Temperature Sensor harness connector.
Disconnect the Automatic Temperature Control (ATC) C1 harness connector.
Measure the resistance between the Air Outlet Temperature Sensor Signal circuit
and the Sensor Ground circuit.
Is the resistance below 10k ohms?
Yes → Repair the Air Outlet Temperature Sensor Signal circuit for a
→ Replace the Automatic Temperature Control (ATC) in accordance
No
ACTION
short to the Sensor Ground circuit.
Perform BODY VERIFICATION TEST - VER 1.
with the Service Information.
Perform BODY VERIFICATION TEST - VER 1.
135
HEATING & A/C
Continued
APPLICABILITY
All