Table of Contents
Advertisement
DOK-MOTOR*-2AD********-IT01-EN-P
Rexroth 2AD Asynchronous Housing Motors
6.2.4
Connecting the Motor Fan
The motor fan is connected to the supply network via a cable and a motor
protective switch and is operated independently of the controller.
①
Power connection cable diameter Ø 7 ... 10 mm
②
Protective switch
③
Plug connector
④
Fan
Fig.6-12:
Fan connection
●
To connect the motor fan, the fan connector must be opened
and closed.
●
The connector for connecting the motor fan is included in the
scope of delivery and is located on the motor fan.
●
Electric connection may only be established by specialized
staff. Observe the safety instructions.
●
The tightness of the connector housing may not be reduced.
●
Motor protective switch and electric fusing are selected by
the machine manufacturer. Follow the regulations applicable
in the country where the machine is set up.
Bosch Rexroth AG
41/61
Assembly
Advertisement
Table of Contents
