Table of Contents
Advertisement
14/61
Bosch Rexroth AG
About this Documentation
Symbols
Symbol
Meaning
Reference to supplementary documentation
This note gives important information, which must be observed.
Single, independent action step.
1.
Numbered action instructions:
2.
The numbers show that the action steps must be taken one after the
other.
3.
Warning against dangerous electric voltage.
Warning against hot surfaces.
Warning against rotating machine parts.
Warning against overhead load.
Electrostatic sensitive devices.
Prohibition for persons with cardiac pacemaker.
Do not carry along metal parts or clocks.
Hammer scales are forbidden.
The UL Recognized Component Mark shows recognized component
parts which are components of a bigger product or system.
The letters C and E stand for "Conformité Européenne". The CE mark
only shows that a product conforms with the respective EC guidelines.
Conformity with the Low Voltage Directive 2006/95EC (Appendix III B),
DIN EN 60034-1 and DIN EN 60034-5 is confirmed for 1MB motors.
SI
Component prepared for use in systems for "integrated safety technol‐
ogy".
Fig.1-2:
Meaning of symbols
DOK-MOTOR*-2AD********-IT01-EN-P
Rexroth 2AD Asynchronous Housing Motors
Advertisement
Table of Contents
