DOK-MOTOR*-2AD********-IT01-EN-P
Rexroth 2AD Asynchronous Housing Motors
●
Protect the flange sockets from external force effect.
For motors in Ex-design:
Connect additional protective conductor according to project
planning manual
①
Flange socket INS480 (view of plug-in side)
②
Connector socket INS380 (view of plug-in side)
③
Coupling
④
Flange socket
⑤
Only one PTC sensor is applied (spare sensor lines are in the socket
housing)
⑥
Holding Brake (Optional)
⑦
Overall shield connection by clamping the cables of the strain relief in
the connector
⑧
Connection designations on the Rexroth drive controller
Fig.6-5:
Power connection via flange socket, connection diagram
●
Please observe the necessary power wire cross-section to
connect the respective motor in the project planning manual
Rexroth 2AD.
●
Use ready-made cables of Rexroth, see documentation
Rexroth Connection Cables IndraDrive and IndraDyn.
Bosch Rexroth AG
Rexroth 2AD.
35/61
Assembly