Rcom INSECT MAX 90 User Manual page 6

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
1. Introduction
Name & Function of Operation Parts
Temp. UP Button
Setting Temp. Up
Temp. DOWN Button
Setting Temp. Down
D.T.G Button
Daily temperature
range set
Heater Lamp
(Lighting when
working)
What's 'Temperature&Humidity Setting'?
This is that you set up temp.&humi. As you want to have inside of the machine.
[ Function Operation & Explanation ]
Function
Temp.
Setting
Humidity
Setting
Daily Temp. Gap
(D.T.G) set
Changing
Cels. & Fahr.
Initialization
(Factory setting)
How to OFF
Humidification
Function
6
Temp. Gap Lamp
D.T.G mode
(Blink when working)
Insect Incubator Rcom Max 90 User Manual
(3) Name & Function of
Operation Parts
Temp. Display Humi. Display
Power Failure Alarm Function
Blink with power failure
(to remove, press SET button)
※ If you want to change setting value, keep pressing "SET" button and change the value.
How to Operate
below 40%
Humi. UP Button
Setting Humi. Up
Humi. DOWN Button
Setting Humi. Down
Setting Button
Setting value check
Humi. working lamp
(Lighting when working)
Water Supplement Lamp
(Blink with water shortage)
- Alarm for water supplement sounds in twice.
( First alarm with water shortage / Second alarm after 3 hours )
Explanation
Setting of needed temp.
Setting of needed humidity.
D.T.G ON / D.T.G OFF
(one time a day for 3 hours
+ 1.5℃ operation)
Changing Cels. & Fahr.
Initialization
In case of incubation
at low humidity
DIGITAL INCUBATOR