Examples For The Temperature Controllers; Introduction - Siemens SIMATIC Manual

6

Examples for the Temperature Controllers

6.1

Introduction

Overview
This chapter contains executable application samples for the temperature
controllers FB 58 "TCONT_CP" and FB 59 "TCONT_S" with simulation of the
process.
You will find the examples in the folder ...\STEP7\EXAMPLES.
Requirements
•
You have set up and wired an S7 station consisting of a power supply and a
CPU.
•
STEP 7 (>= V5.1 + Service Pack 3) is installed on your programming device.
•
The programming device is connected to the CPU.
Preparing the Samples
1. Open the sample project zEn01_13_STEP7__PID-Temp in the
...\STEP7\EXAMPLES folder with the SIMATIC Manager and copy it to your
project folder with a suitable name ( File > Save As ). Use the View > Details
option to display all the information.
2. Insert a station in your project to match your hardware configuration.
3. Select a sample program and copy the program to the station.
4. Configure the hardware with HW Config .
5. Save the hardware configuration and download it to the CPU.
6. Download the block folder to the CPU.
PID Temperature Control
A5E00125039-02
6-1