Cleaning And Maintenance; Technical Specifications - ResMed Astral Mobility bag User Manual

For use with mains power
WARNING
• Ensure that the power cord does not pose a tripping or
choking hazard.
• When the Astral device is used in the mobility bag, the
internal battery may stop charging in high ambient
temperature conditions. If the internal battery is not
charging, remove the Astral device and the power
supply unit from the mobility bag to continue charging.
1. Connect the DC plug of the Astral external power supply unit
to the rear of the Astral device.
2. Before connecting the power cord to the ResMed power
supply unit, ensure the end of the connector of the power
cord is correctly aligned with the input socket on the power
supply unit.
3. Plug the other end of the power cord into the power socket.

Cleaning and maintenance

Wipe your mobility bag with a damp cloth and mild detergent.
Allow to air dry.

Technical specifications

Nominal dimensions
(L x W x H)
Weight
Water Ingress
Protection
Alarm volume range
Symbols
The following symbols may appear on your product or
packaging.
Indicates a Warning. A warning alerts you to possible injury
or explains special measures for the safe and effective use of
the product;
European authorized representative;
Catalogue number;
REF
Fire, open ignition source and smoking prohibited
4
SlimFit:
SlimFit:
Read instructions before use;
Drip proof;
420 mm x 320 mm x 190 mm
(16.53" x 12.59" x 7 .48")
Device Bag:
280 mm x 240 mm x 110 mm
(11.02" x 9.45" x 4.33")
Accessory Pouch:
120 mm x 90 mm x 80 mm
(4.72" x 3.54" x 3.15")
Approx. 2.3 kg (5.07 lb)
Device Bag + Accessory Pouch:
Approx. 0.51 kg (1.12 lb)
Device Bag only:
Approx. 0.42 kg (0.93 lb)
Astral and External battery
protected against dripping water
when tilted up to 15 degrees
from specified orientation (IPX2).
45–75 dBA (in five steps) (when
used inside the Mobility Bag)
Batch code;
LOT
No open flame:
Manufacturer;