Configuring Your Utred30-16 - LogTag UTRED30-16 Quick Start Manual

Confi guring your UTRED30-16
Connect your UTRED30-16 to your
computer via the USB cable provided.
The USB socket on the device is
located on the bottom, protected by a
rubber seal.
1. Open LogTag Analyzer
2. Click 'Configure' from the 'LogTag' menu or click the 'Wizard'
icon
3. Adjust your logger configuration settings as required.
For more information on configuration settings, please refer to
Configuring the UTRED30-16
'F1' for help from your keyboard
4. Click 'Next' to upload the configuration settings to the logger
5. Click 'Close' to exit the configuration page
in the Product User Guide or press
Page 6