Feed Button; Belt Clip - Epson TM-P60II User Manual

Error LED
Printer Condition
Power On
Charge LED
Printer Condition
Power On and
battery
installed
Battery LED
Printer Condition
Power On
Power on and
buzzer sounds.
*You can select whether to continue printing or to stop printing when only1 LED flashes.
(Power) button
Press this button to turn the power on or off. To turn the power off, hold the
button for more than 2 seconds.

Feed button

Press this button to feed paper.

Belt Clip

You can hang the printer on your belt using the belt clip attached to the back of the
printer.
8
Error LED
On Printer is offline (paper out, power-on initialization, roll
paper cover open, the remaining battery charge is at E
level).
Off Printer is in normal operation, is running a self-test, or
feeding paper using the Feed button.
Flashing The thermal head is too high in temperature, roll paper
cover was opened during printing, autocutter
mulfunction, abnormality in a memory R/W check, power
supply voltage is extreamely high/low, the CPU has
executed an incorrect address, or abnormality in internal
circuit connection.
Charge
LED
On The battery is being charged.
Off The battery is fully charged.
Flashing There is abnormality in battery charging.
Battery Error Battery
LED charge status
LED
3 LEDs On Off Level H
2 LEDs On Off Level M
1 LED On Off Level L
1 LED Off Level S *
flashing
On
3 LEDs Off On Level E
Meanings
Meanings
Meanings
-
-
You can continue printing, but
replacement or charge of the
battery is recommended.
Replace or charge the battery.
(Printing may stop in the middle.)
Replace or charge the battery.
(The printer is unable to print.)
Replace or charge the battery.