Table of Contents
Advertisement
Manual VIPA System 100V
About this Manual
Overview
HB100E - CPU - Rev. 12/12
This manual describes the available System 100V Micro-PLC CPUs from
VIPA. Besides of a product overview you will find the detailed description of
the CPUs.
You'll get information about installing and operating a Micro-PLC CPU.
Chapter 1:
Basics
This introduction includes recommendations on the handling of the
modules of the VIPA System 100V as central resp. decentral automation
system.
Besides a system overview you will find general information to the System
100V like dimensions, installation and operating conditions.
Chapter 2:
Hardware description Micro-PLC CPU 11x
The Micro-PLC CPU 11x is available in different variants that will be des-
cribed in this chapter.
Here you will find information about the structure, connection diagrams,
working method and technical data.
Chapter 3:
Deployment Micro-PLC CPU 11x
This chapter includes all information required for the deployment of the
Micro-PLC CPU 11x, from the project engineering to the commissioning.
Chapter 4:
Deployment Micro-PLC CPU 11xDP
Content of this chapter is the deployment of the Micro-PLC CPU 11xDP
under PROFIBUS. You will get all information required for the deployment
of an intelligent PROFIBUS-DP slave.
Chapter 5:
Deployment Micro-PLC CPU 11xSER
Content of this chapter is the deployment of the Micro-PLC CPU with serial
interface. After an introduction to protocols and procedures connection and
project engineering are descript.
About this Manual
1
Advertisement
Table of Contents
Need help?
Do you have a question about the System 100V Series and is the answer not in the manual?