Safety Point - Electro-Voice EBK1-M10-3PACK Installation Notes

ELX200 Full-Range Loudspeaker Accessories
1.1

Safety point

Safety point
As an added safety measure, it is suggested the user install an extra suspension point back to
the building structural supports. This safety point should have as little slack as possible (less
than 1-inch is preferable).
Adding a safety point
To add a safety point, do the following:
1.
2.
3.
2017.12 | 02 | F.01U.332.445
Remove one of the screws from the top of the loudspeaker.
Replace the screw with one eyebolt and one washer.
Tether the safety point back to the building structural supports.
An added safety point is established back to the structural supports.
Installation note Electro-Voice