Toshiba nv-pack JTLI41 Instruction Manual page 35

5
Mounting on the side of the slot 53
5.1 Remove one set screw (M3 x 6) of the fixing bracket fixing the mask panel and remove the
mask panel.
Please keep the removed mask panel carefully.
5.2 Insert the card vertically into the connector of the extended slot and fix the fixing bracket
removed in step 5.1 with the set screw.
6
Holding the side of the PC cover with both hands, with the front of the PC cover at
an angle diagonally lower, insert about 3 mm in the PC, slide the PC cover in the
direction of the arrow and mount
7
Fix the PC cover with 2 screws (M 3 × 6) on the side of the PC, 2 screws on the top
of the PC (M 3 × 6) and 3 screws on the back of the PC (M 3 × 6)
Unified Controller nv-pack series TC-net I/O Loop PCI Express Card JTLI41 Instruction Manual
Fixing bracket
Mask panel
Figure 4-6 Card mounting process 4
Card
Figure 4-7 Card mounting process 5
PC cover
Figure 4-8 PC cover mounting process
4.2 Card Mounting
21