Inspection - Toshiba nv-pack JTLI41 Instruction Manual

5.1

Inspection

There are daily and regular inspections in maintenance and inspection procedures.
■Daily inspection
Inspect the following in daily inspection:
Items
LEDs Check that LEDs are clearly visible
when lit.
Connectors Check
connected properly, all cables are
tightly connected, and there is no
abnormal appearance.
Ventilation Check that the ventilation port of the
port PC which connects the card is free
of dust and stains.
Indoor Check the temperature and humidity
environment of the room where the product is
installed that they meet the product
specifications.
■Periodic inspection
Periodic inspection is recommended at least once a year to prevent accidents and keep the
product in good operating condition for a long period of time.
For periodic inspection, consult your nearest Toshiba service representatives.
Unified Controller nv-pack Series TC-net I/O Loop PCI Express
Table 5-1 Daily inspection items
Inspection contents
that the connector
Response in case of abnormality
If they are not distinguishable, clean
them with a soft cloth.
is If anything wrong is found, contact
your Toshiba service representative.
If the ventilation port is clogged or
dirty, remove the dirt with a vacuum
cleaner and wipe the port with a soft
cloth.
If the temperature and humidity are
out of the product specification
range, it is within the product
specification range
TM
Card JTLI41 Instruction Manual
5.1 Inspection
27