Interfaces On The Bottom Side - Kontron Embedded Computers V Box Express User Manual

Interfaces on the Bottom Side

USB 2.0 Connectors
The system is equipped at the front side with 4x USB 2.0 interface connectors.
These connectors and provide connections for USB-compatible devices.
DVI-I Interface Connector
The DVI-I interface (Single Link) supports both digital and analog connections.
Digital devices can be connected directly to this interface of the V Box Express but
analog devices should be connected to this interface via a DVI to VGA adapter
(not included).
Serial Interface Connectors (COM1, COM2 and COM3,COM4 )
These RS232 connections are available as 9-pin D-SUB plugs and provide
connection for serial devices.
Ethernet Interface Connectors
These interface connectors are provided as RJ45 sockets with integrated LEDs.
The data transfer rate depends on the installed ETXexpress module (see below):
Ethernet Port
LAN1
LAN2
LED States:
Left LED State
off
green
yellow
V Box Express – User's Manual
Data Transfer Rate for System Configuration with:
ETXexpress-PM Module
10/100 Mbps
10/100/1000 Mbps
Link Speed Right LED State
10 Base-T Off
100 Base-T Green
1000 Base-T
Product Description
ETXexpress-CD Module
10/100/1000 Mbps
10/100/1000 Mbps
Link Activity State
Link not active
Link active
15